Was this helpful?
Filtering Test Results
You can use a filter to limit the number of test results that are displayed on the Summary list. For example, you might filter the list to see only one type of test, such as Radiology test results.
The module header row keeps track of the number of test results currently displayed for the patient. For example, when no filter is applied, you might see “Test Results (9)” in the header, and all of the available tests displayed in the summary list. If a filter is applied, the Filter button is displayed at the top of the summary list, with a label describing the filter criteria. For example, you might see “Test Results (2)” in the module header, and the Filter button labeled, “Filtered by: Radiology” to indicate that only the Radiology tests are shown. If you apply more than one filter, the module header counts the combined number, and the Filter button label lists each of the filters that are applied.
To apply a filter for Test Results, follow these steps:
1. Tap Filter in the upper right corner of the Test Results Summary screen.
The Filters screen is displayed and shows the following:
-The top of the screen displays a list of Filter Terms. The currently selected filter(s) are indicated by a checkmark.
-Below the Filter Terms, you may see additional filters by Source (the hospital or practice from which the test result information was derived), if your organization has implemented the Health Information Exchange feature and it is enabled in your user profile. The currently selected filter(s) are indicated by a checkmark.
2. Select or deselect one or more filters from the Filter Terms or Sources.
If some but not all of the filters are selected, a Select All button is available at the bottom of the screen; tap Select All to select all of the available filters. If all of the filters are selected, a Deselect All button is available; tap Deselect All to deselect of the filters.
3. Tap Done.
The test results that match the filter criteria are displayed. If you selected more than one filter, the filters are ORed. For example, if you selected both the Cardiac and Radiology filters, then any test results that are of the type Cardiac or Radiology are displayed.
The filter(s) remain selected until you choose something different.
To go back to showing all of the test results for the patient:
1. From the Test Results Summary list, tap Filter in the top-right corner of the screen.
2. At the bottom of the Filters screen, tap Select All, and then tap Done.
All of the available test results are displayed in the Test Results Summary list.

Why Don't I See This Feature?